膜蒸馏用聚偏氟乙烯微孔膜的结构控制 Ⅲ.制膜条件的选择和膜蒸馏性能

为了提高聚偏氟乙烯微孔膜的膜蒸馏通量,本文对制膜条件进行了综合控制,在铸膜液中加入了丙酮溶胀剂,并采用乙醇水溶液作凝固浴。研究了挥发时间和凝固浴中乙醇含量对膜形态结构的影响。比较了由不同制膜条件制得的膜的膜蒸馏性能。结果表明,适当选择制膜条件,能得到膜蒸馏性能优良的膜。其截留率近于100%。在暖侧温度为55℃、冷侧温度为25℃时,膜的膜蒸馏通量可达22.5 kg/(m~2·h),已接近反渗透膜的水平。     

偶联剂对地砖用PVC填充材料相态结构和力学性能的影响

研究了钛酸酯类偶联剂和硅烷类偶联剂对钙矿、硅酸盐填充的PVC填允材料力学性能、相态结构、密度、热失重率及吸水伸长率和耐热阻燃性能的影响。结果表明,偶联剂可改善填充PVC的抗冲性能,降低其拉伸强度,扫描电镜分析表明,填料越细,分散越均匀,越易被PVC树脂所包覆,力学性能越好,研究得到了比重大、热失重率低、吸水伸长率小、阻燃耐烧灼性好的高填充PVC硬质塑料地板砖。     

Synthesis, characterization of bimetallic Sn-Zn-MCM41 and its catalytic performance in the hydroxylation of phenol

A series of Sn-Zn modified-MCM41 has been synthesized by direct hydrothermal method and characterized using ICP, XRD, TG/DTA, FT-IR, HRTEM and N_2-adsorption techniques. Catalytic performances of the obtained materials were evaluated in the hydroxylation of phenol with H₂O₂. Results indicated that all the samples exhibited typical hexagonal arrangement of mesoporous structure with high surface area and the heteroatoms were probably incorporated into the framework of MCM41. Catalytic tests revealed that the bimetallic incorporated materials were effective catalysts in the hydroxylation of phenol. The conversion of phenol could be reach to 56.8% for the catalysts with Sn: Zn: Si = 2.69: 4.57: 100 (molar ratio) under the optimized reaction conditions. Moreover, the materials containing Sn and Zn exhibited higher catalytic activity than monometallic Sn and Zn modified MCM41.     

轮胎厂蒸汽的生产使用和管理

介绍了轮胎厂蒸汽的生产、使用及管理过程中应该注意的问题。就如何以最低的成本生产蒸汽、以最佳的效果使用蒸汽、以最科学的方法管理蒸汽提出了自己的见解。特别对锅炉的配置与运行、管道及附件的正确安装、管道保温层的临界厚度及冷凝水的回收等问题进行了探讨。     

影响聚氨酯弹性体紫外线稳定性的因素

介绍了聚氨酯弹性体在紫外线照射下发生光老化的反应机理及其软段、硬段种类和结构对弹性体紫外线稳定性的影响,探讨了光稳定剂、光屏蔽剂对弹性体耐紫外线稳定性的影响。     

应用轴功目标法合成低温分离序列

针对以乙烯深冷分离系统为代表的低温精馏过程合成问题。低温精馏系统包括精馏序列以及与之对应的换热网络和制冷系统。依据轴功目标方法,低温分离系统的能耗可以归结到制冷系统的轴功上,且过程的轴功消耗可以不经过换热网络和制冷系统的合成而直接得到。本文以轴功消耗作为优化目标建立数学模型,在模型中不包含换热网络和制冷系统结构的情况下建立精馏序列与对应轴功消耗的关系。这样,在不增加问题复杂程度的前提下实现对系统总能耗的优化。对乙烯冷端分离系统的合成的算例研究表明,通过基于轴功目标的数学模型可以高效的得到具有最低轴功消耗的精馏系统。     

丙烯酸酯改性双环戊二烯酚型环氧树脂及其性能研究

通过FT－IR光谱表征了丙烯酸酯改性的DCPD酚型环氧树脂／DDM体系结构，并通过测定改性体系的凝胶时间和分析凝胶时间的影响因素，研究了该体系的反应特性，同时，对改造前后DCPD酚型环氧树脂体系的性能做了分析。     

湿法聚氨酯树脂浆料配方的改进

通过对湿法PU合成革用聚氨酯(PU)树脂浆料配方的改进，降低了浆料的生产成本，浆料的后期加工性能提高，并且PU膜的性能也有所改善。     

近十年常温干法精脱硫专利技术发展动态

收集了近十年来国内的常温干法精脱硫专利，并分类列举出各种脱硫剂的物化性质和几种常温精脱硫工艺，重点阐述了该技术的优缺点及其未来发展方向。     

Electrosteric stabilization of concentrated cement suspensions imparted by a strong anionic polyelectrolyte and a non-ionic polymer

Strong polyelectrolytes, known as superplasticizers, improve the initial fluidity of concentrated cement suspensions through electrostatic stabilization. These polyelectrolytes do not maintain the initial fluidity, however, primarily due to an increase in the ionic strength of the cementitious suspension. Consequently, non-ionic polymers are often used in conjunction with polyelectrolytes to provide steric stabilization and hence to sustain the desired fluidity over a longer time, and this has lead to the development of copolymers with both electrostatic and steric (electrosteric) functionalities. To design such polymers, it is necessary to optimize the balance between electrostatic and steric stabilization to maximize suspension fluidity. We have quantified the effects of a strong anionic polyelectrolyte, melamine formaldehyde sulfonate (MFS), and a non-ionic polymer, hydroxypropylmethylcellulose (HPMC), on the zeta potential of cement particles and the steady shear and low-amplitude rheological properties of concentrated cement suspensions. While the adsorption of MFS onto the cement particle surfaces leads to a sign inversion in the zeta potential, the adsorption of the non-ionic HPMC has no significant effect on the potential. The addition of HPMC to the suspensions substantially reduces the steady shear viscosity and the storage modulus at constant MFS concentration; in addition, there exists an intermediate HPMC concentration that minimizes fluidity. The resulting suspension fluidity is also maintained over a longer time than in the absence of HPMC. This improvement in the stability and fluidity of cement suspensions is attributed to “complementary electrosteric dispersion/stabilization”, and provides insight to the design of polymers with electrosteric functionality.